- 600 An operation is pending.
- 601 An invalid port handle was detected.
- 602 The specified port is already open.
- 603 The caller's buffer is too small.
- 604 Incorrect information was specified.
- 605 The port information cannot be set.
- 606 The specified port is not connected.
- 607 An invalid event is detected.
- 608 A device was specified that does not exist.
- 609 The device type was specified that does not
exist.
- 610 An invalid buffer was specified.
- 611 A route was specified that is not available.
- 612 A route was specified that is not allocated.
- 613 An invalid compression was specified.
- 614 There were insufficient buffers available.
- 615 The specified port was not found.
- 616 An asynchronous request is pending.
- 617 The modem is already disconnecting.
- 618 The specified port is not open.
- 619 The specified port is not connected.
- 620 No endpoints could be determined.
- 621 The system could not open the phonebook.
- 622 The system could not load the phonebook.
- 623 The system could not find the phonebook entry for this connection.
- 624 The system could not update the phonebook file.
- 625 The system found invalid information in the phonebook.
- 626 A string could not be loaded.
- 627 A key could not be found.
- 628 The connection was closed.
- 629 The connection was closed by the remote
computer.
- 630 The modem was disconnected due to hardware
failure.
- 631 The user disconnected the modem.
- 632 An incorrect structure size was detected.
- 633 The modem is already in use or is not configured for dialing out.
- 634 Your computer could not be registered on the remote network.
- 635 There was an unknown error.
- 636 The device attached to the port is not the one expected.
- 637 A string was detected that could not be converted.
- 638 The request has timed out.
- 639 No asynchronous net is available.
- 640 A error has occurred involving NetBIOS.
- 641 The server cannot allocate NetBIOS resources
needed to support the client.
- 642 One of your computer's NetBIOS names is
already registered on the remote network.
- 643 A network adapter at the server failed.
- 644 You will not receive network message popups.
- 645 There was an internal authentication error.
- 646 The account is not permitted to log on at this time of day.
- 647 The account is disabled.
- 648 The password for this account has expired.
- 649 The account does not have permission to dial in.
- 650 The remote access server is not responding.
- 651 The modem has reported an error.
- 652 There was an unrecognized response from the
modem.
- 653 A macro required by the modem was not found in the device .INF file
section.
- 654 A command or response in the device .INF file section refers to an
undefined macro.
- 655 The [MESSAGE] macro was not found in the device .INF file section.
- 656 The [DEFAULTOFF] macro in the device .INF file section contains an
undefined macro.
- 657 The device .INF file could not be opened.
- 658 The device name in the device .INF or media
.INI file is too long.
- 659 The media .INI file refers to an unknown device name.
- 660 The device .INF file contains no responses for
the command.
- 661 The device .INF file is missing a command.
- 662 there was an attempt to set a macro not listed in the device .INF file
section.
- 663 The media .INI file refers to an unknown
device type.
- 664 The system has run out of memory.
- 665 The modem is not properly configured.
- 666 The modem is not functioning.
- 667 The system was unable to read the media .INI
file.
- 668 The connection was terminated.
- 669 The usage parameter in the media .INI file is invalid.
- 670 The system was unable to read the section name from the media .INI
file.
- 671 The system was unable to read the device type from the media .INI
file.
- 672 The system was unable to read the device name from the media .INI
file.
- 673 The system was unable to read the usage from the media .INI file.
- 674 The system was unable to read the maximum connection BPS rate from the
media .INI file.
- 675 The system was unable to read the maximum carrier connection speed
from the media .INI file.
- 676 The phone line is busy.
- 677 A person answered instead of a modem.
- 678 There was no answer.
- 679 The system could not detect the carrier.
- 680 There was no dial tone.
- 681 The modem reported a general error.
- 691 Access was denied because the user name and/or
password was invalid on the domain.
- 692 There was a hardware failure in the modem.
- 695 The state machines are not started.
- 696 The state machines are already started.
- 697 The response looping did not complete.
- 699 The modem response caused a buffer overflow.
- 700 The expanded command in the device .INF file
is too long.
- 701 The modem moved to a connection speed not
supported by the COM driver.
- 703 The connection needs information from you, but the application does
not allow user interaction.
- 704 The callback number is invalid.
- 705 The authorization state is invalid.
- 707 There was an error related to the X.25 protocol.
- 708 The account has expired.
- 709 There was an error changing the password on the domain. The password
might have been too short or might have matched a previously used password.
- 710 Serial overrun errors were detected while
communicating with the modem.
- 711 The Remote Access Service Manager could not start. Additional
information is provided in the event log.
- 712 The two-way port is initializing. Wait a few
seconds and redial.
- 713 No active ISDN lines are available.
- 714 No ISDN channels are available to make the
call.
- 715 Too many errors occurred because of poor phone
line quality.
- 716 The remote access service IP configuration is unusable.
- 717 No IP addresses are available in the static
pool of remote access service IP addresses.
- 718 The connection timed out waiting for a valid
response from the remote computer.
- 719 The connection was terminated by the remote
computer.
- 720 The connection attempt failed because your
computer and the remote computer could not agree on PPP control protocols.
- 721 The remote computer is not responding.
- 722 Invalid data was received from the remote
computer. This data was ignored.
- 723 The phone number, including prefix and suffix,
is too long.
- 726 The IPX protocol cannot be used for dial-out
on more than one modem at a time.
- 728 The system cannot find an IP adapter.
- 729 SLIP cannot be used unless the IP protocol is
installed.
- 731 The protocol is not configured.
- 732 Your computer and the remote computer could
not agree on PPP control protocols.
- 733 Your computer and the remote computer could not agree on PPP control
protocols.
- 734 The PPP link control protocol was terminated.
- 735 The requested address was rejected by the
server.
- 736 The remote computer terminated the control
protocol.
- 737 Loopback detected.
- 738 The server did not assign an address.
- 739 The authentication protocol required by the remote server cannot use
the stored password. Redial, entering the password explicitly.
- 740 An invalid dialing rule was detected.
- 741 The local computer does not support the
required data encryption type.
- 742 The remote computer does not support the
required data encryption type.
- 743 The remote server requires data encryption.
- 751 The callback number contains an invalid character. Only the following
characters are allowed: 0 to 9, T, P, W, (,), -, @, and space.
- 752 A syntax error was encountered while
processing a script.
- 753 The connection could not be disconnected because it was created by the
multi-protocol router.
- 754 The system could not find the multi-link bundle.
- 755 The system cannot perform automated dial because this entry has a
custom dialer specified.
- 756 This connection is already being dialed.
- 757 Remote access services could not be started automatically. Additional
information is provided in the event log.
- 758 Internet connection sharing is already enabled on the connection.
- 760 An error occurred while routing capabilities were being enabled.
- 761 An error occurred while Internet connection sharing was being enabled
for the connection.
- 763 Internet connection sharing cannot be enabled. There are two or more
LAN connections in addition to the connection to be shared.
- 764 No smart card reader is installed.
- 765 Internet connection sharing cannot be enabled. A LAN connection is
already configured with the IP address required for automatic IP addressing.
- 766 The system could not find any certificate.
- 767 Internet connection sharing cannot be enabled. The LAN connection
selected on the private network has more than one IP address configured.
Reconfigure the LAN connection with a single IP address before enabling
Internet connection sharing.
- 768 The connection attempt failed because of failure to encrypt data.
- 769 The specified destination is not reachable.
- 770 The remote machine rejected the connection attempt.
- 771 The connection attempt failed because the network is busy.
- 772 The remote computer's network hardware is incompatible with the type
of call requested.
- 773 The connection attempt failed because the destination number has
changed.
- 774 The connection attempt failed because of a temporary failure. Try
connecting again.
- 775 The call was blocked by the remote computer.
- 776 The call could not be connected because the destination has invoked
the Do Not Disturb feature.
- 777 The connection attempt failed because the modem on the remote computer
is out of order.
- 778 It was not possible to verify the identity of the server.
- 779 To dial out using this connection, you must use a smart card.
- 780 An attempted function is not valid for this connection.
- 781 The encryption attempt failed because no valid certificate was found
|